ATV PROGRAM – 48K SPECTRUM
To load the program:-
LOAD "" CODE Note: CODE is a spectrum keyword
When the program has loaded enter the QRA of your site e.g. ZK18B, then
enter the time, hours then minutes followed by your callsign. After a few
seconds this information should appear on the screen with the message 'EMPTY'
displayed at the bottom, which of course you can change.
COMMAND Function
* Prefix to change first line e.g. *GW8ABC 4 to 8 char's.
** “ “ second line e.g. **ZK82C 4 to 8 char´s.
*** “ “ third line e.g. ***WORTHING 4 to 8 char's.
message Of 4 - 45 characters will produce lateral scrolling across the
middle of the screen.
single char. A single character will be enlarged 32 times to fill the screen
CO Continue scrolling.
Valid QRA Will calculate the distance from site QRA and display at foot
of screen.
Cpi Will allow colour change where p=Paper and i=Ink colours
e.g. C07.
CH Cross Hatch.
COL Colour bars in any direction selected by keys 5,6,7 & 8.
CS To set the clock, first hours then minutes should be entered.
CF To turn clock off.
CN To turn clock on.
CL To put the clock in the top left corner of the screen.
CR To put the clock in the top right corner of the screen.
CD To use the background colours for the clock.
CB To highlight the clock with bright background.
C1 Clock displayed using spectrum character set.
C2 Clock displayed using chunkey character set.
DEMO Demonstrates some of the features of the program.
D1 Doubles size of the first line and displays in middle of screen.
D2 Doubles size of the second line and displays in middle of screen
D3 Doubles size of third line and displays in middle of screen.
ENTER Will return you from any screen to the message/command screen.
FG Hi-res union Jack (Not Sinclairs), with callsign insert.
F1 Causes the first line to flash.
F2 Causes the second line to flash.
F3 Causes the third line to flash.
M1 First Hi-res map with callsign insert.
M2 Second Hi-res map with callsign insert.
PA Pattern with callsign insert.
RUN Re-starts program.
T1 Hi-res test card with callsign insert.
T2 Second test card with callsign insert.
ATV PROGRAM – 16K SPECTRUM
To load the 16K version of the ATV Program type LOAD "" and then
ENTER. When the Program has loaded a BEEP will be heard. Press the 0
key for the display screen. Here are a list of the commands.
0=Display screen.
1=To change line 1. (4 to 8 characters)
2=To change line 2. (4 to 8 characters)
3=To change line 3. (4 to 8 characters)
4=To Change the message in the Test card.
5=Colours bars (white left)
6=Colours bars (white down)
7=Colours bars (white up)
8=Colours bars (white right)
9=Crosshatch.
Q=Double height printing of line 1.
W=Double height printing of line 2.
E=Double height printing of line 3.
R=Double height printing on Test card message.
T=Testcard.
Y=Full screen printing of any character after the Y. To return press ENTER.
U=To change the colours. First new Ink colour then paper.